Products tagged with 'diffuser'

These colorful fabric covers are designed to fit any five to six inch reflectors and use elastic to stay on the front of the reflector. They cast a very even and smooth broadcast of colored light due to the thin cloth diffusion material. The colors can be seen in the photo as all kits are the same selection.

This is one of two diffusors that simply snap onto the silver 5" reflectors that we have made for about 45 years. This version is the more clear diffusor that will lose only 1/3 of an f-stop as it slightly softens and diffuses the light going through it. Some UV light is absorbed as well so the light is softer and warmer than when direct from the reflector.

This is one of two diffusors that simply snap onto the silver 5" reflectors that we have made for about 45 years. This version is the more cloudy diffusor that will lose almost an f-stop as it considerably softens and diffuses the light going through it. Some UV light is absorbed as well so the light is softer and warmer than when direct from the reflector.

The ADG4 is a very simple but effective way to spread the light over a very wide area. While it does diffuse away 2.5 f-stops from the hottest part of the non-diffused direct reflector, it also spreads the light coverage from about 60 degrees to over 180 degrees. It is not perfectly even on a reflector in order to allow you to still aim the light where you want it the strongest, but it is perfectly even if you mount it "bare bulb" for that purpose.

The Gel Filter Kit is a plastic ring adapter that allows the use of 6 inch square or circular gel filters with any five inch reflector. The adapter allows you to sandwich in between it's disks, one or more color, diffuser, or neutral density filters to modify the light coming straight out of the reflectors. The kit includes three common color temperature shifts to make the flash look more like indoor lighting color temperatures; one green one for florescent, one yellow one for incandescent and one darker yellow for halide lamps like at a sports complex.

The AR12 is a 12 inch Beautydish reflector that has a center deflector that blocks the light coming directly from the flashtube. That creates a softer looking image without the normal specularity of a small flash. In addition to being 12 inches across the front and thus more than four times bigger than the normal reflector, it also includes a cloth diffuser for an even softer look. Lastly, a grid is included that snaps into the front of the reflector and limits the light output to less than 50 degrees.

The AR5K is the normal size as we have used for all of these years which is five inches across. This reflector is black on the outside with a shiny silver finish inside. The kit includes a grid to keep the angle limited to about 40 degrees. A simple plastic diffuser cover is also included.