Accessories

The BC12 allows you to add your own car or marine battery inside of the container and flash for thousands of flashes per charge. These were originally invented for team sports photographers who needed to compete with full sunlight thousands of times per day while they are out in the middle of a field. Fashion photographers have used it the same way on a beach or the street...

This Belt Clip fits the Lumedyne HV Cyclers and many of the Classic Packs that had inserts for the use of one or two belt clips. There are different hole spacings between the Classic Cyclers and Packs and the newest Cyclers so this belt clip has three holes to fit any of those products.

The ABRA replaces the normal Lumedyne reflector and has a mounting plate that allows the use of any Bowens™ style reflector or accessories. It has a 1/4-20 mounting point to keep the weight of large light modifiers off of the plastic body of the Lumedyne Heads. There is a spring clip to lock the Bowens™ style reflector/accessory in place.

These colorful fabric covers are designed to fit any five to six inch reflectors and use elastic to stay on the front of the reflector. They cast a very even and smooth broadcast of colored light due to the thin cloth diffusion material. The colors can be seen in the photo as all kits are the same selection.

The single red cover for a Lumedyne Head jack is ready to cover one Head jack when not in use. It is one of the same ones that were included with the Classic Power Packs. It has no holes in it, so it is best sealed but it is not water proof. This is the individual little red round cover that most people eventually lost that came standard on the Classic Packs or the ones attached with a leash to the front of the modern Packs.

The set of two red covers for the Head jacks are secured together by a short nylon line. There is enough length between them to also go through the D-ring and stay secured to the Power Pack. These are similar to the individual covers that most people eventually lost that came standard on the Classic Packs or the ones attached to the front of the modern Packs.

This is one of two diffusors that simply snap onto the silver 5" reflectors that we have made for about 45 years. This version is the more clear diffusor that will lose only 1/3 of an f-stop as it slightly softens and diffuses the light going through it. Some UV light is absorbed as well so the light is softer and warmer than when direct from the reflector.

This is one of two diffusors that simply snap onto the silver 5" reflectors that we have made for about 45 years. This version is the more cloudy diffusor that will lose almost an f-stop as it considerably softens and diffuses the light going through it. Some UV light is absorbed as well so the light is softer and warmer than when direct from the reflector.

The ADG4 is a very simple but effective way to spread the light over a very wide area. While it does diffuse away 2.5 f-stops from the hottest part of the non-diffused direct reflector, it also spreads the light coverage from about 60 degrees to over 180 degrees. It is not perfectly even on a reflector in order to allow you to still aim the light where you want it the strongest, but it is perfectly even if you mount it "bare bulb" for that purpose.