Products

If you want to build your own extra large battery this enclosure is 5.75 inches tall outside. It has the right connector to attach to the Lumedyne Power Packs. It has the keeper clips for the Pack's latches. It has a simple DC charge jack of 2.1mm by 5mm and a charging LED but no further charge control circuit or PEPI. No battery or charger is included

The XSMF is a very special High Speed Module that makes the Lumedyne flash system recycle much faster. It plugs between the Extra Large Battery or a few other high power options and Pack or the rest of the system. It creates a much-much faster recycle time at any power setting. This unit draws so many amps only the Batteries, etc. that have the extra power connections can work with this Speed Module. Any of the eligible Packs may be used and they won't get brighter. They will recycle super fast from those limited power options.

The CU4A mounts on top of the CU1Z Charger to expand its single Battery capacity into four Batteries at once. This Adapter is not a charger by itself but does work with the Auto Charger to allow up to four Batteries to be automatically maintained and topped off without having to swap Batteries around. The CU4A does have two helpful indicators that show that the Batteries connected did reach a full charge level and another that warns you if a bad Battery is plugged into one of the connectors.

The 200ws Deluxe Signature Pack has seven settings from 3ws to 200ws on a single dial control. There is a separate Trim Control to go smoothly between the f-stops also. The Pack has a seven light battery gauge and can run with fast or extra fast recycling times. Deluxe Signature Series Packs have TTL controls for film cameras and very few digital cameras which still use TTL like Hasselblad or Phase One (NOT Canon™, Nikon™ or Sony™ for example). Signature Deluxe Packs are compatible with all sizes and styles of Lumedyne batteries and can power any of the Lumedyne Heads. The Pack can be boosted up to higher power or sped up with High Speed Modules and can run from most Lumedyne AC Power adapters.

This Head features a Quartz high power Flashtube for higher durability in heavy duty applications. The Basic Signature Head is very strong with the square metal shell but it's still only about one pound. It's sold separately from the Head Cables to allow you to select from 5 to 20 foot options. It works with any Lumedyne Head Cable or Head Extension Cable. The Head originally does include the reflector, 2 diffusors, a metal snoot and the 2400ws Flashtube and a 25 watt modeling bulb.

The 400ws Deluxe Signature Pack has seven settings from 6ws to 400ws on a single dial control. There is a separate Trim Control to go smoothly between the f-stops also. The Pack has a seven light battery gauge and can run with fast or extra fast recycling times. Deluxe Signature Series Packs have TTL controls for film cameras and very few digital cameras which still use TTL like Hasselblad or Phase One (NOT Canon™, Nikon™ or Sony™ for example). Signature Deluxe Packs are compatible with all sizes and styles of Lumedyne batteries and can power any of the Lumedyne Heads. The Pack can be boosted up to higher power or sped up with High Speed Modules and can run from most Lumedyne AC Power adapters.

The Deluxe Signature Head is very strong with the square metal shell but it's still only about one pound. It's sold separately from the Head Cables to allow you to select from 5 to 20 foot options. It works with any Lumedyne Head Cable or Head Extension Cable. The adjustable beep that indicates that it is ready again works with all of the Power Packs. The Head originally does include the reflector, 2 diffusors, a metal snoot and the 800ws Flashtube and a 25 watt modeling bulb. Deluxe Heads are compatible with some separate TTL Modules from Metz™ for limited digital cameras and most film cameras but not Canon™, Nikon™ or similar digital cameras.

The Deluxe Signature Head with Quartz Flashtube is very strong with the square metal shell but it's still only about one pound. It's sold separately from the Head Cables to allow you to select from 5 to 20 foot options. It works with any Lumedyne Head Cable or Head Extension Cable. The adjustable beep that indicates that it is ready again works with all of the Power Packs. The HQDM Head originally does include the reflector, 2 diffusors, a metal snoot and the 2400ws Flashtube and a 25 watt modeling bulb. Deluxe Heads are compatible with some separate TTL Modules from Metz™ for limited digital cameras and most film cameras but not Canon™, Nikon™ or similar digital cameras.

This 400ws Pack is designed to power one Quantum Q-Flash™ model X flash head (of any generation number) directly without needing any additional adapters because it has a Quantum™ style head jack on it already. It can power a second Q-Flash™ (while using the QF-42 or the HCQQ cable adapters) or a full power Lumedyne Head with the second head jack. It offers a recycle time twice as fast as the Quantum Qpaq-X™ and has all of the 400ws in one module. It connects to all generations and styles of Lumedyne Batteries and can be powered by our AC Power Supplies. It has super simple operation with power on/off, speed of recycling and battery gauge push buttons.